Sunricher DMX Dual Channel Constant Current 75W DMX Driver with RDM
The SRP210675WCCT constant current DMX decoder is a professional grade DMX512 decoder with RDM allowing bi-directional communication between the decoder and an RDM-enabled DMX Desk.
The current settings have to be set using the dip switches on the decoder. These can be configured for constant current products between 250mA and 1500mA.
The maximum load on the DMX driver is 75W. The mains input voltage is from 100V - 277V AC at 50/60Hz and the driver has a high power factor value of >0.93 and a low inrush current of just 2A at 230V AC.
This product is suitable for controlling Single Colour or Dual colour (CCT) colour temperature adjustable constant current products up to 75W.
The various parameters of the driver can be set manually using the menu buttons and the digital interface are:
DMX address
Change the DMX memory channel quantity (Single channel mode for single-colour LEDs or dual-channel DMX for tunable white LEDs)
Adjust the PWM frequency from 500Hz to 30KHz
Adjustable BIT rate 8 BIT or 16 BIT
Set the Dimming Curve Gamma value to various Linear or Logarithmic values.
The driver has a Short circuit, Over Voltage and Over Temperature protection built in and it will automatically recover after the fault is removed.
Please contact our technical sales team by phone, email or through live chat on our website.
Key Features:
Dimmable DMX LED driver
RDM enabled
Max. output power 75W
2 Channel 250-1500mA constant current output
Adjustable PWM frequency 500Hz-35KHz
Adjustable dimming curve Gamma Value
High power factor and efficiency
Easy setting using the digital interface
5 years warranty
Related Items
Sunricher KNX to DALI Master
Sunricher DMX Ultra-Pro 5 Channel 700mA C/C DMX Decoder RDM & Master Mode
Sunricher KNX Controller
Sunricher KNX 8 Button Switch Wall Panel
Sunricher Modular 2 Channel Blank Control Module
Sunricher IR Close-up Door Sensor (Low voltage)
Sunricher KNX 200W Dimmable Driver
