Tagra | IP65 | 24V | Essential | Horizontal Bend LED Neon Flex | 10x15mm | 8.0W p/m | 6500K | 5 Metre
Specifications:
Voltage - 24v
Dimensions - 15mm x 10mm
LED Type - SMD2835 in Epistar Chip
Number Of LEDs - 72 Per Metre
Cut Points - Every 12.5cm
Max Load - 15m
LED Distance - 8.33mm
Power - 8W Per Metre
Lumens - 226 Per Metre
CRI - >80
Jacket Type: Dome
Splashproof
Min. Bend Diameter - 120mm
LED Neon Flex Mini is a new compact version of our Neon Flex tube lighting, at only 15 x 10mm its small size and light weight it is ideal for slimline perfect for single use display applications indoors and outdoors.
As the name suggests, it is highly flexible and can be bent to a minimum diameter of 120mm, and can be cut easily to your desired lengths. Maximum Length at any time is 15 metres.
Neon Flex can be dimmed via mains dimming, DALI, DMX or RF controllers.
Please Note: We are not able to offer refunds on cut lengths of Neon Flex Mini, only for full 50m reels. If you order more than a 1 Metre length of Neon Flex you will receive a continuous run as it is taken from a 50m roll.
Heat shrink tube is also highly recommended to seal both the endcap and power cable in order to maintain the splashproof rating.
All our neon flex comes with a 1 year guarantee as standard on indoor installations and 6 month guarantee on outdoor installations.
Dimming Compatibility
Compatible with dimmers using standard control protocols including DMX, Dali, 0-10V, PWM.
Compatible with smarthome dimmers including those from Lutron, Loxone, Rayco, Control 4, Lightwave, Wizz, Casambi, Crestron.
Driver Requirements:
1 metre > 6w
2 metres > 12w
3 metres > 18w
4 metres > 24w
5 metres > 30w
6 metres > 36w
7 metres > 42w
8 metres > 48w
9 metres > 54w
10 metres > 60w
11 metres > 66w
12 metres > 72w
13 metres > 78w
14 metres > 84w
15 metres > 90w
Drivers and cabling are not covered by the splashproof rating and therefore must be housed indoors in a dry environment. splashproof rating applies to the Neon Flex only.
A 24v LED Transformer is required to power our Neon Flex.
All products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.